AUTOMOTIVE COURSES

Package 2

CRICOS: 109340H, 109339A & 109338B

AUR30620 Certificate III in Light Vehicle Mechanical Technology
AUR40820 Certificate IV in  Automotive Mechanical Overhauling
AUR50216 Diploma of Automotive Technology

Career
Pathway

Duration:
104 Weeks

Fees:
See Below

Delivery Mode:
Face-to-Face

+160 hrs industry placement

Automotive Courses

Package 2

These packaged courses have been developed for people who want to gain the skills and knowledge required to perform a broad range of tasks on a variety of light vehicles in the automotive service and repair industry and/or who want to develop their skills in mechanical overhauling and perform auto diagnosis and repair at an advanced level.

Suitable for international students who wish to study automotive technology in Australia, these courses are designed to be packaged to provide greater flexibility in meeting individual student’s needs.

Students are required to hold a current Australian visa with study rights to commence this course.

AUR30620 Certificate III in Light Vehicle Mechanical Technology

AUR40820 Certificate IV in  Automotive Mechanical Overhauling

AUR50216 Diploma of Automotive Technology

Course Fees:

Tuition:   $26,000  

Non-tuition Fees: $3000

Enrolment Fee: $400

Total Course Cost: $29,400

Close,Up,Hands,Of,Unrecognizable,Mechanic,Doing,Car,Service,And

Download Course Brochure

Overview:

Available as a stand-alone or packaged option, this course provides the trade skills and knowledge to become a light vehicle motor mechanic. It is practical in nature with a hands-on approach.

Course Structure:

AURAEA002 Follow environmental and sustainability best practice in an automotive workplace

AURASA102 Follow safe working practices in an automotive workplace

AURETR112 Test and repair basic electrical circuits

AURETR123 Diagnose and repair electronic spark ignition engine management systems

AURETR125 Test, charge and replace batteries and jump-start vehicles

AURETR129 Diagnose and repair charging systems

AURETR130 Diagnose and repair starting systems

AURETR131 Diagnose and repair ignition systems

AURLTZ101 Diagnose and repair light vehicle emission control systems

AURLTB103 Diagnose and repair light vehicle hydraulic braking systems

AURLTD104 Diagnose and repair light vehicle steering systems

AURLTD105 Diagnose and repair light vehicle suspension systems

AURLTE102 Diagnose and repair light vehicle engines

AURTTA104 Carry out servicing operations

AURTTA118 Develop and carry out diagnostic test strategies

AURTTB101 Inspect and service braking systems

AURTTC103 Diagnose and repair cooling systems

AURTTE104 Inspect and service engines

AURTTF101 Inspect and service petrol fuel systems

AURTTK102 Use and maintain tools and equipment in an automotive workplace

AURETR236 Diagnose and repair electronically controlled suspension systems

AURETR144 Diagnose and repair integrated engine and transmission management systems

AURLTE001 Remove and install light vehicle engine assemblies

AURLTF101 Diagnose and repair light vehicle mechanical fuel injection systems

AURTTF105 Diagnose and repair engine forced induction systems

AURTTX103 Inspect and service automatic transmissions

AURVTW103 Carry out advanced gas metal arc welding on vehicle body sections

AURTTX102 Inspect and service manual transmissions

AURTTQ03 Inspect and service drive shafts

AURTTQ001 Inspect and service final drive assemblies

AURTTA105 Select and use bearings, seals, gaskets, sealants and adhesives

AURLTX103 Diagnose and repair light vehicle clutch systems

AURLTX101 Diagnose and repair light vehicle manual transmissions

AURETR124 Diagnose and repair compression ignition engine management systems

AURETR143 Diagnose and repair electronic body management systems

AURAFA103 Communicate effectively in an automotive workplace

ASG Entry Requirements

Minimum age: 18 years

Academic suitability:

• Completion of Year 12 schooling or higher

• English proficiency at a minimum of IELTS 5.5 or equivalent

You also need to supply your own PPE – steel cap boots, long pants & high-viz shirt.

Qualification Pathway

For a packaged option, successfully complete: AUR30620 Certificate III in Light Vehicle Mechanical Technology within 52 weeks and AUR40820 Certificate IV in Automotive Mechanical Overhauling within 26 weeks in order to continue to AUR50216 Diploma of Automotive Technology.

Student Services

We offer a range of support services to assist you in achieving a successful course outcome. This includes tutorial support and Language, Literacy & Numeracy assistance where required. Please contact us to discuss any other individual needs.

Assessment

Assessment takes place at the end of each unit with a Knowledge Test and Practical Demonstration. There will also be approximately 3 hours per week selfstudy for assessment preparation in your own time.

Certification

On successful completion you will be awarded the AQF AUR30620 Certificate III in Light Vehicle Mechanical Technology, or a Statement of Attainment in recognition of units achieved in partial completion.

Career Path

  • Automotive Mechanic

Overview:

Available as a packaged option, this course provides the trade skills and knowledge to perform advanced troubleshooting and repair tasks in an automotive repair workshop. It is very practical in nature with a hands-on approach.

Core Units:

AURTTA121 Diagnose complex system faults

AURETR017 Overhaul charging system alternators

AURETR018 Overhaul starting system motors

AURTTF003 Overhaul diesel fuel injection system components

AURLTB001 Overhaul light vehicle braking system components

AURTTD005 Overhaul steering system components

AURTTM004 Assemble engine blocks and sub-assemblies

AURTTQ004 Overhaul final drive assemblies

AURTTX007 Overhaul clutch assemblies

AURTTX008 Overhaul manual transmissions

ASG Entry Requirements

Minimum age: 18 years

Academic suitability:

• Completion of Year 12 schooling or higher

• English proficiency at a minimum of IELTS 5.5 or equivalent

You also need to supply your own PPE – steel cap boots, long pants & high-viz shirt.

Qualification Entry Requirement:

For a packaged option, successfully complete:

AUR30620 Certificate III in Light Vehicle Mechanical Technology  within 52 weeks and AUR40820 Certificate IV in Automotive Mechanical Overhauling within 26 weeks in order to continue to AUR50216 Diploma of Automotive Technology.

Qualification Pathway

For a packaged option, successfully complete:

AUR30620 within 52 weeks and AUR40820 within 26 weeks in order to continue to AUR50216.

Certification

On successful completion you will be awarded the AQF AUR40820 Certificate IV in Automotive Mechanical Overhauling, or a Statement of Attainment in recognition of units achieved in partial completion.

Assessment:

Assessment takes place at the end of each unit with a knowledge test and practical demonstration. There will also be approximately 3 hours per week self-study for assessment preparation in your own time.

Student Services:

We offer a range of support services to assist you in achieving a successful course outcome. This includes tutorial support and Language, Literacy & Numeracy assistance where required. Please contact us to discuss any other individual needs.

Career Path:

  • Automotive Workshop Supervisor

Overview:

Available as a packaged option, this course provides the trade skills and knowledge to perform advanced troubleshooting and repair tasks in an automotive repair workshop. It is very practical in nature with a hands-on approach.

Course Structure:

AURTTA121 Diagnose complex system faults
AURETR017 Overhaul charging system alternators AURETR018 Overhaul starting system motors
AURTTF003 Overhaul diesel fuel injection system components AURLTB001 Overhaul light vehicle braking system components AURTTD005 Overhaul steering system components AURTTM004 Assemble engine blocks and sub-assemblies AURTTQ004 Overhaul final drive assemblies
AURTTX007 Overhaul clutch assemblies
AURTTX008 Overhaul manual transmissions

ASG Entry Requirements

Minimum age: 18 years

Academic suitability:

• Completion of Year 12 schooling or higher

• English proficiency at a minimum of IELTS 5.5 or equivalent

Completion of AUR40820 Certificate IV in Automotive Mechanical Overhauling or equivalent automotive mechanical Certificate IV qualification.

You also need to supply your own PPE – steel cap boots, long pants & high-viz shirt.

Qualification Pathway

Associate Degree of Engineering (Mechanical)

Certification

On successful completion you will be awarded the AQF AUR50216 Diploma of  Automotive Technology or a Statement of Attainment in recognition of units achieved in partial completion.

Assessment

Assessment takes place at the end of each unit with a knowledge test and practical demonstration. There will also be approximately 3 hours per week self-study for assessment preparation in your own time.

Student Services

We offer a range of support services to assist you in achieving a successful course outcome. This includes tutorial support and Language, Literacy & Numeracy assistance where required. Please contact us to discuss any other individual needs.

Career Path:

  • Automotive Mechanic Supervisor
  • Automotive Mechanic

CONTACT US

CONTACT US

CONTACT US