icon

Thanks for you enquiry

A Skills Assessment Specialist will be in contact with you shortly

icon-close
Category

High Risk

Licence to Operate a Slewing Mobile Crane (Over 100 Tonnes) – TLILIC0015

TLILIC0015

Licence to operate a
slewing mobile crane

(over 100 tonnes)

Australian Skills Group

The TLILIC0015 Licence to Operate a Slewing Mobile Crane (Over 100 Tonnes) unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a capacity over 100 tonnes and includes how to plan work, conduct routine checks, set up crane, transfer load, mobile load and shut down and secure crane after completing operations.

The slewing mobile crane (over 100 tonnes) is one that is a:

  • non-slewing mobile crane with a capacity exceeding 3 tonnes
  • reach stacker
  • slewing mobile crane with a capacity exceeding 100 tonnes
  • vehicle loading crane with a capacity of 10 metre tonnes or more, excluding the application of load estimation and slinging techniques to move a load

It does not include a backhoe, excavator, front-end loader or other earth moving equipment when configured for crane operation

A person performing this work is required to hold a slewing mobile crane – with a capacity over 100 tonnes high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Operate a Slewing Mobile Crane (Up to 100 Tonnes) – TLILIC0014

TLILIC0014

Licence to operate a
slewing mobile crane

(up to 100 tonnes)

Australian Skills Group

The TLILIC0014 Licence to Operate a Slewing Mobile Crane (Up to 100 Tonnes) unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a capacity up to 100 tonnes and includes how to plan work, conduct routine checks, set up crane, transfer load, mobile load and shut down and secure crane after completing operations.

The slewing mobile crane (up to 100 tonnes) is one that is a:

  • non-slewing mobile crane with a capacity exceeding 3 tonnes
  • reach stacker
  • slewing mobile crane with a capacity of 100 tonnes or less
  • vehicle loading crane with a capacity of 10 metre tonnes or more, excluding the application of load estimation and slinging techniques to move a load

It does not include a backhoe, excavator, front-end loader or other earth moving equipment when configured for crane operation

A person performing this work is required to hold a slewing mobile crane – with a capacity up to 100 tonnes high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Operate a Slewing Mobile Crane (Up to 60 Tonnes) – TLILIC0013

TLILIC0013

Licence to operate a
slewing mobile crane

(up to 60 tonnes)

Australian Skills Group

The TLILIC0013 Licence to Operate a Slewing Mobile Crane (Up to 60 Tonnes) unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a capacity up to 60 tonnes and includes how to plan work, conduct routine checks, set up crane, transfer load, mobile load and shut down and secure crane after operation.

The slewing mobile crane (up to 60 tonnes) is one that is a:

  • non-slewing mobile crane with a capacity exceeding 3 tonnes
  • reach stacker
  • slewing mobile crane with a capacity of 60 tonnes or less
  • vehicle loading crane with a capacity of 10 metres or more, excluding the application of load estimation and slinging techniques to move a load

It does not include a backhoe, excavator, front-end loader or other earth moving equipment when configured for crane operation

A person performing this work is required to hold a slewing mobile crane – with a capacity up to 60 tonnes high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Operate a Slewing Mobile Crane (Up to 20 Tonnes) – TLILIC0010

TLILIC0010

Licence to operate a
slewing mobile crane

(up to 20 tonnes)

Australian Skills Group

The TLILIC0010 Licence to Operate a Slewing Mobile Crane unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a capacity up to 20 tonnes that is a:

  • non-slewing mobile crane with a capacity exceeding 3 tonnes
  • reach stacker
  • slewing mobile crane with a capacity of 20 tonnes of less
  • vehicle loading crane with a capacity of 10 metre tonnes or more, excluding the application of load estimation and slinging techniques to move a load

It includes how to plan the work, conduct routine checks, set up crane, transfer a load, mobile load and shut down and secure the crane after completing the operation.

Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include a front-end loader, backhoe, excavator or other earth moving equipment when configured for crane operation.

A person performing this work is required to hold a slewing mobile crane – with a capacity up to 20 tonnes high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Operate a Non-Slewing Mobile Crane (Greater than 3 Tonnes Capacity) – TLILIC0008

TLILIC0008

Licence to operate a
non-slewing mobile crane

(greater than 3 tonnes capacity)

Australian Skills Group

The TLILIC0008 Licence to Operate a Non-Slewing Mobile Crane (Greater Than 3 Tonnes Capacity) unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a capacity exceeding 3 tonnes safely. It includes operating a non-slewing mobile crane to plan the work, conduct routine checks, set up crane, transfer load, mobile load and shut down and secure crane.

It includes articulated mobile cranes and locomotive cranes but does not include vehicle tow trucks.

A person performing this work is required to hold a non-slewing mobile crane high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

4 Days

Licence to Operate a Boom-type Elevating Work Platform (Boom Length 11 Metres or More) – TLILIC0005

TLILIC0005

Licence to operate a
boom-type elevating work platform

(boom length 11 metres or more)

Australian Skills Group

The TLILIC0005 Licence to Operate a Boom-Type Elevating Work Platform (Boom Length 11 Metres or More) unit specifies the skills and knowledge required to safely operate a boom-type elevating work platform where the length of the boom is 11 metres or more. It includes planning the work, conducting routine checks, the set-up of elevating work platform, operate elevating work platform, and shut down and secure elevating work platform

Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated. It includes the skills operating a boom-type elevating work platform too.

A person performing this work is required to hold a boom-type elevating work platform high risk work (HRW) licence.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

N/A

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

3 Days

Licence to operate a forklift truck – TLILIC0003

Next Start Dates:19th - 21st Oct 21

TLILIC0003 - ENROL TODAY TO SECURE YOUR SPOT IN OUR NEXT COURSE TODAY

Licence to
operate a forklift truck

Book Here
Australian Skills Group

Licence to Operate a forklift truck – TLILIC0003

Delivery: 

3 days – 8.30 – 3.00pm

On Site at Brendale QLD 4500

Next Start Date:

19th – 21st October 21

Course Fee:

$400 Per Person

Pre-requisites and what to bring on training day:

  • Minimum age 18 years
  • The ability to understand mathematical symbols and basic calculations
  •  Ability to read and write basic English (no interpreter allowed)

A person performing this work is required to hold a forklift truck high risk work (HRW) licence. A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Find Out More
CONTACT US

What you can expect to learn during your forklift training:

– Forklift types and uses
– Load charts
– Load types and characteristics
– Lifting attachment types and uses
– Be able to plan work and manage risks
– Pre and post start check
– Forklift licence safe driving techniques
– Forklift stability
– Shift and manoeuvre a variety of loads
– Shutdown procedures and associated paperwork.

Licence to Operate a Tower Crane – CPCCLTC4001

CPCCLTC4001

Licence to operate a tower crane

Australian Skills Group

The CPCCLTC4001 Licence to Operate a Tower Crane unit provides the skills and knowledge required to operate a tower crane for licensing purposes.  It covers a jib or boom/job crane mounted on a tower structure, demountable or permanent, including both horizontal and luffing jib types. It does not cover self-erecting tower cranes. It requires the operator to plan the work, conduct routine checks, transfer loads and shut down and secure the crane.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

C6

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Erect Alter and Dismantle Scaffolding Advanced Level – CPCCLSF4001

CPCCLSF4001

Licence to erect alter and dismantle scaffolding advanced level

Australian Skills Group

The CPCCLSF4001 Licence to Erect, Alter and Dismantle Scaffolding Advanced Level unit provides the skills and knowledge required to erect, alter and dismantle scaffolding at the Advanced level for licensing purposes. It consists of all intermediate scaffolding work including all other scaffolding work connected with the use and operation of Hung scaffolds and Suspended scaffolds. It also covers the scope of work to plan the job, select and inspect equipment, set up task, erect scaffold and scaffold equipment and dismantle scaffold and scaffolding equipment.

A successful assessment outcome will meet the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

Pre-Requisites

CPCCLSF3001 – Licence to erect, alter and dismantle scaffolding intermediate level

OR

Hold a valid licence for intermediate scaffolding.

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level – CPCCLSF3001

CPCCLSF3001

Licence to erect alter and dismantle scaffolding intermediate level

Australian Skills Group

The CPCCLSF3001 Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level unit covers the outcomes required to erect, alter and dismantle scaffolding at the Intermediate level which includes use and operation of Cantilevered crane-loading platforms, Cantilevered and spurred scaffolds, Barrow ramps and sloping platforms, perimeter safety screens and shutters Mast climbers, and tube and coupler scaffolds (including tube and coupler covered ways and gantries) for licensing purposes.

Entry Requirements

Minimum 18 years

The ability to understand mathematical symbols and basic calculations

English speaking (no interpreter allowed) as per Regulation 6.20 (d) is satisfied that the person has sufficient knowledge of the English language, both written and oral to safely do work of that class

Delivery Location

On-site

Course Cost

Contact us for details.

Duration

5 Days

    FREE SKILLS ASSESSMENT